Of nanoparticles in water was shown in Fig. 2c. It could

Of nanoparticles in water was shown in Fig. 2c. It could be seen from DLS data that the blank and drug loaded nanoparticles diameters had peak at 50?00 nm, which was nearly consistent with the TEM and images. 1317923 In vitro cumulative release profiles of Gentamicin from nanoparticles are shown in Fig. 3a. The release profiles appeared to have two phases. The first phase was a rapid release in the prior period and about 70 were released in this phase (within the first 6 h). The rapid releasing process was mainly due to the nanoparticles surface drugs could easily diffuse in the initial time and the swelling of nanoparticles promoted drug release. The second phase was a relatively slow release ranging from 6 to 24 h, and about 80 drug were released in this phase due to the swelling equilibrium and degradation of nanoparticles. 11967625 The dissolved drugs were diffused into the release medium. The cumulative percentage release of drug from nanoparticles was about 83 for 72 h. As shown in Fig. 3b, Gentamicin release rate of GNPs-CS/ KGM has sustainable increase in 36 h and then drug release became slower. The cumulative drug release rate was about 75 for 72 h.Antibiotic Hemostatic First Aid Wound DressingTable 4. The Bacteriostatic ring diameter of C75K25 film, Drug loaded Poly (dex-GMA/AAc) nanoparticles and GNPs-CS/KGM against different bacterial strain (values are mean 6 S.D., n = 6 observations in each group).Group C75K25 film GNPs-CS/KGM Drug loaded Poly (dex-GMA/AAc) nanoparticles doi:10.1371/journal.pone.0066890.tStaphylococcus aureus 8.660.73 21.360.79 25.160.Fexinidazole Escherichia coli N 21.560.70 22.360.Green copper pseudomonas N 22.860.51 22.460.Characterization of KGM/CS blend filmFig. 4 shows the cross-section morphology for KGM/CS blending film. The three-dimensional network structure of film was observed very clearly, which was similar to our previous work. The porous structure was benefit for cell adhesion and proliferation as well as promotes the growth of tissue. The porous layer was arranged very regularly, which was benefit to separate components through the membranes and improve of the flux. Porous C25K75 films had pores with an average diameter of 95616 mm and C50K50 film of 1067 mm. The pore size of CS and C75K25 film were between them. KGM has stronger swelling capacity which resulted in increased pore size while amino of CS could form hydrogen bonds with hydroxy of KGM. This duality influence lead to the result that the tendency of increase with the pore size appeared smaller before alonging with increasing percentage of KGM. So when KGM/CS proportion became 1:1, the pore size reached smallest. To study the effects of KGM on blend film swelling, the degree of swelling was plotted with different KGM/CS ratio coded as K25C75, K50C50, and AN-3199 K75C25 for 72 h, as shown in Fig. 5a. It was noticed that all films has strong capability of water uptake in 3 h due to strong interaction between water molecules and the membrane containing OH groups and NH2 groups [37]. The degree of swelling of blend films increased with more KGM due to its good hydrophilicity. SDP of C25K75 reached (890636) . After 18 h, swelling rate of blend films decreased due to dissolution of KGM. Water vapor transmission rate (WVTR) was one of the most important indicators to evaluate the WVTR moisturizing performance of wound dressing and hemostasis material. It was generally acknowledged that wound dressings with WVTR between 2000 to 5000 g?m22?day21 could prevent excess deh.Of nanoparticles in water was shown in Fig. 2c. It could be seen from DLS data that the blank and drug loaded nanoparticles diameters had peak at 50?00 nm, which was nearly consistent with the TEM and images. 1317923 In vitro cumulative release profiles of Gentamicin from nanoparticles are shown in Fig. 3a. The release profiles appeared to have two phases. The first phase was a rapid release in the prior period and about 70 were released in this phase (within the first 6 h). The rapid releasing process was mainly due to the nanoparticles surface drugs could easily diffuse in the initial time and the swelling of nanoparticles promoted drug release. The second phase was a relatively slow release ranging from 6 to 24 h, and about 80 drug were released in this phase due to the swelling equilibrium and degradation of nanoparticles. 11967625 The dissolved drugs were diffused into the release medium. The cumulative percentage release of drug from nanoparticles was about 83 for 72 h. As shown in Fig. 3b, Gentamicin release rate of GNPs-CS/ KGM has sustainable increase in 36 h and then drug release became slower. The cumulative drug release rate was about 75 for 72 h.Antibiotic Hemostatic First Aid Wound DressingTable 4. The Bacteriostatic ring diameter of C75K25 film, Drug loaded Poly (dex-GMA/AAc) nanoparticles and GNPs-CS/KGM against different bacterial strain (values are mean 6 S.D., n = 6 observations in each group).Group C75K25 film GNPs-CS/KGM Drug loaded Poly (dex-GMA/AAc) nanoparticles doi:10.1371/journal.pone.0066890.tStaphylococcus aureus 8.660.73 21.360.79 25.160.Escherichia coli N 21.560.70 22.360.Green copper pseudomonas N 22.860.51 22.460.Characterization of KGM/CS blend filmFig. 4 shows the cross-section morphology for KGM/CS blending film. The three-dimensional network structure of film was observed very clearly, which was similar to our previous work. The porous structure was benefit for cell adhesion and proliferation as well as promotes the growth of tissue. The porous layer was arranged very regularly, which was benefit to separate components through the membranes and improve of the flux. Porous C25K75 films had pores with an average diameter of 95616 mm and C50K50 film of 1067 mm. The pore size of CS and C75K25 film were between them. KGM has stronger swelling capacity which resulted in increased pore size while amino of CS could form hydrogen bonds with hydroxy of KGM. This duality influence lead to the result that the tendency of increase with the pore size appeared smaller before alonging with increasing percentage of KGM. So when KGM/CS proportion became 1:1, the pore size reached smallest. To study the effects of KGM on blend film swelling, the degree of swelling was plotted with different KGM/CS ratio coded as K25C75, K50C50, and K75C25 for 72 h, as shown in Fig. 5a. It was noticed that all films has strong capability of water uptake in 3 h due to strong interaction between water molecules and the membrane containing OH groups and NH2 groups [37]. The degree of swelling of blend films increased with more KGM due to its good hydrophilicity. SDP of C25K75 reached (890636) . After 18 h, swelling rate of blend films decreased due to dissolution of KGM. Water vapor transmission rate (WVTR) was one of the most important indicators to evaluate the WVTR moisturizing performance of wound dressing and hemostasis material. It was generally acknowledged that wound dressings with WVTR between 2000 to 5000 g?m22?day21 could prevent excess deh.